Function: 1, CPU anti-counterfeit coins computer program device 2, paragraph 4 super anti-phishing program set 3, the track to stay and reverse mobile monitoring 4, how quickly cast a fast, no cards Dollar 5, quasi count fishing alarm to distinguish between the size of coins Product parameters: Applies to coin diameter: 18mm-31mm Applicable coins concentration: 1.2mm-2.4mm Operating voltage: DC +12 V Operating Temperature: -15 ~ +75 Output signal: pulse Coin in the coin side folder used for comparison with the parent currency (or that kind of currency), the parameters of the the coin device would like $ sampling in the coin into the case, investment The coin will put coins with the sample comparison, if the parameters of the same (in a set of precise range), it will receive the coins and outputs a corresponding signal. Instructions for use: 1. Please remove the plastic coin folder currency slot, put the coins to be used. 2. Loosen the screws of the back of the coin slot, coin slot to adjust the back in accordance with the size of the coin diameter fixed piece, so to avoid mistakenly voted diameter is too large. 3. With the the Arcade board needs to select NO (normally open) and NC (normally closed) switch; except the special consoles Taiwan Greater Mary and marked generally use the NO (normally open) mostly. 4. The platen needs with the consoles, select COIN signal length / speed three-stage switch (TIMER SWITCH): 20ms for short newsletter number applies to large Mary need fast coin machine. 40ms Alert No. applicable to the general machine (such as non-special specifications generally machine to switch to this paragraph), 60ms for long slow signal applied to not require fast coin-operated entertainment machine. 5. VR knob based coin screening sensitivity adjustment, clockwise to adjust the (+) rotation, the coin accepted tolerance range larger adjustment counterclockwise (-), then the tolerance scope of the tolerances of the coin is small, i.e., screening more stringent . If SW3 precise location over currency poor, set the SW3 switch to the normal position, and then adjust the VR to the appropriate location. |